How to bill tenants for electricity
The short answer: units used = this month's sub-meter reading − last month's reading. The electricity charge = units used × the rate per unit you agreed with your tenant. Read every meter on the same day each month, and keep a dated photo of each reading.
What you need
- A sub-meter for each unit or room you rent, so each tenant pays for their own use.
- A rate per unit agreed with each tenant, ideally written in the rent agreement.
- A fixed day each month to read the meters.
Step by step
- Read the meter on your reading day. Take a photo that shows the reading and the date.
- Subtract last month's reading from this month's. That's the units used.
- Multiply by your rate per unit.
- Show both readings, the units used and the rate on the bill, and keep the photos, so your tenant can check them.
A worked example
Last month's reading was 4,512 and this month's is 4,698. The rate you agreed is ₹8 per unit.
- Units used: 4,698 − 4,512 = 186 units
- Electricity: 186 × ₹8 = ₹1,488
On the bill: "Electricity: 4,512 → 4,698 = 186 units × ₹8 = ₹1,488". Keep the photos in case your tenant asks.
Which rate per unit?
- Use the rate you agreed with your tenant, and keep it in writing.
- If your own electricity bill charges in slabs, one simple way to set a fair rate is your average rate: the energy charges on your bill ÷ the units on your bill.
- Check your state's rules before you set a rate above what you pay.
When a tenant moves in or out mid-month
Read the meter on the move-in or move-out day, and bill only the units between those two readings. Write the reading down with the date, so the final bill is clear.
When two rooms share one meter
There's no exact way to split one meter. Agree the method in writing before the tenancy starts, for example equal shares, or shares by days stayed. Better still, fit a sub-meter per room.
Avoiding disputes
- Read on the same day every month.
- Keep a dated photo of every reading.
- Show both readings, the units used and the rate on every bill, and keep the photos.
- Let tenants see their meter, and send you their own reading if they like.
- If a reading looks wrong, check the meter before you bill, not after.
A fixed amount instead
Some landlords charge a fixed amount for electricity each month instead of reading meters. It's simpler, but less fair when a tenant's use changes with the seasons. Agree it in writing too.
Bill electricity without the arithmetic. Every month Nestars makes each tenant's bill for you: rent, electricity from the meter reading you enter, at the rate you set, and any unpaid dues. Each bill shows both meter readings, the units and the rate. Tenants can even send their reading with a photo for you to check. It's free for one property and one tenant. Create your free account →
General information, not legal advice. Electricity rules differ by state.